Author: Timothy Kim
Date: Thursday, November 17, 2022 at 2:00 pm
Location: Martin Hall, Room EGR-4164B (CEEE Meeting Room)
Committee Members:
Research Professor Yunho Hwang, Chair
Professor Bao Yang
Professor Jungho Kim
Title of Paper: “ENABLING CO2 ISOTHERMAL COMPRESSION USING PISTON AND INTEGRATED GAS COOLER”
Abstract:
New avenues of decreasing environmental impacts and increasing the efficiency of HVAC systems are constantly being explored in the race to reduce carbon emissions and global warming. These new avenues have led to the exploration of the use of carbon dioxide as a refrigerant in refrigeration applications. Many researchers have also investigated ways to reduce the power consumption of compressors, which is typically the main source of power draw for HVAC systems. One theoretical process to achieve this is through isothermal compression.
This thesis explores the idea of isothermally compressing CO2 by using a liquid piston and integrated gas cooler to achieve higher efficiencies with this trans-critical cycle. A test facility was designed, sized, constructed and calibrated to emulate suction and discharge conditions of a typical CO2 system for air conditioning applications. A prototype of the liquid piston and integrated gas cooler chamber was designed and constructed as well. A simulation model was built in Engineering Equation Solver in order to properly design the gas cooler chamber. Other critical components have been carefully chosen to ensure smooth operation of the system.
Results show isothermal efficiencies up to 82.7% during steady state operation and an isothermal efficiency of 91.2% during steady state operation with the additional help of evaporative cooling. Comparing this to other conventional compressors give up to 34.2% improvement in the isothermal compressor efficiency. These results show sufficient performance to warrant the design of a fully working prototype despite efficiency/capacity tradeoffs in the system. Challenges had been encountered such as the loss of refrigerant through the liquid piston, which will be accounted for in the next prototype. Discussion of the next prototype include the use of a double acting piston and smaller tubed fractal heat exchanger design.